My Cart



  • How To Apply Marble Dip
    Make sure you thoroughly prep nails to ensure adhesion & long-lasting wear!

    Step 1: Push back cuticles.

    -Shape & buff nails.

    -Sanitize hands & nails thoroughly.

    Step 2: Apply a coat of Bond to all fingernails.

    Step 3: Pour French White & spoon CL-64 into a container

    Step 4: Use a toothpick or pointed instrument to mix the powder, creating a marble effect

    Step 5: Apply a coat of Step 2 Base starting halfway onto the nail surface, stroking out towards the nail tip.

    -Avoid getting the product on cuticles.
    -The powder will pick up wherever Base is applied.

    Step 6: Quickly press the nail onto the marbled acrylic powder

    Step 7: Tap gently to rid of any loose color dipping powder & gently swipe with a fluffy brush

    Step 8: Repeat steps 4-7 for more coverage.

    Step 9: Apply another coat of Step 2 Base to the entire nail surface & dip into Base & Finish

    Step 10: Apply a coat of Activator to harden the blend of powder & liquid.

    -Allow two minutes for Activator to dry completely.

    Step 11: When the blend of powder and liquid has hardened, file nails to the desired shape.

    -Use a drill or coarse grit buffer to even out the preferred thickness of the nails, then use a 240 grit buffer to smooth the nail surface.

    Step 12:  Wash hands and nails thoroughly or wipe with alcohol

    Step 13: Apply a coat of Activator to harden the blend of powder & liquid

    -Allow two minutes for Activator to dry completely

    Step 14: Apply a coat of Sealer.
    -Allow 3 minutes for nails to dry.

    Step 14b: Apply a second coat of Sealer.
    -Allow 3 minutes for nails to dry completely


    1. To extend product life, be sure to wipe neck and rims of bottles with alcohol immediately after each set of application. Close caps tightly and store in a cool environment away from heat and direct sunlight. If not cleaned properly, caps may become difficult to open for future use.

    2. Brushes may harden or pick up color powder during application. Simply switch them between Brush Softener for easy cleaning & workability.