My Cart

Close
How To Apply Multi Color Negative Space Nails
Make sure you thoroughly prep nails to ensure adhesion & long-lasting wear!
-Push back cuticles
-Shape & buff nails
-Sanitize hands & nails thoroughly

Step 1: Apply a coat of Bond to all fingernails

Step 2: Apply a thin coat of Base to the entire nail surface, stroking out towards the tip of the nail

-Avoid getting the product onto cuticles
-Powder will pick up wherever Base is applied

Step 3: Quickly dip the nail into choice of acrylic color powder stopping when nail is about 1/3rd of the way covered

Step 4: While the nail is still wet dip the nail into a separate container containing Base & Finish, stopping before the the cuticle line to leave space for the third color

Step 5: Dip the nail into acrylic color powder of choice to fully cover the nail plate

Tap gently to rid of any loose color dipping powder & gently swipe with a fluffy brush

Step 6: Apply another thin coat of Base to the entire nail surface

-Avoid getting the product on cuticles
-Product will pick up wherever Base is applied

Step 6: Repeat steps 3-5 for more coverage

Step 7: Apply a coat of Activator to harden the blend of powder & liquid

-Allow two minutes for Activator to dry completely

Step 8: When the blend of powder & liquid has hardened, file nails to the desired shape

-Use a drill or coarse grit buffer to even out the preferred thickness of the nails, then use a 240 grit buffer to smooth the nail surface

Step 9:  Wash hands and nails thoroughly or wipe with alcohol

Step 10: Apply another coat of Activator to harden the blend of powder & liquid

-Allow two minutes for Activator to dry completely

Step 11: Apply a coat of Sealer

-Allow 3 minutes for nails to dry

Step 12: Apply another second coat of Sealer

-Allow 3 minutes for nails to dry completely

PRO TIPS:

1. To extend product life, be sure to wipe neck and rims of bottles with alcohol immediately after each set of application. Close caps tightly and store in a cool environment away from heat and direct sunlight. If not cleaned properly, caps may become difficult to open for future use.

2. Brushes may harden or pick up color powder during application. Simply switch them between Brush Softener for easy cleaning & workability.